Nokia Q9 copy MT6253 dont ON repair to AVATOR BOX DONE

Phone dont ON




*Read Info:

Code:

-------------------Created: 12.11.2013 13:47:44-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=MT6253
CPU_ID=0000000F
NOR_ID=00EC240400000000
NOR_Size=16MB
NOR_Name=[SAMSUNG] K5N2833ATB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

 Initializing...
 DA_LIB_VER_5.6.1.1
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=1  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6253,    HardwareVer:8A00,    SoftwareVer:8A04
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC240400000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: MAUI.09A.W09.52.MP.V3.F1

+++++++++++++++++++End at: 12.11.2013 13:48:17+++++++++++++++++++

*Format FS:

Code:

-------------------Created: 12.11.2013 13:48:34-------------------

Chip=MTK
Action=Format
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=MT6253
CPU_ID=0000000F
NOR_ID=00EC240400000000
NOR_Size=16MB
NOR_Name=[SAMSUNG] K5N2833ATB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

 Initializing...
 DA_LIB_VER_5.6.1.1
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6253,    HardwareVer:8A00,    SoftwareVer:8A04
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC240400000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: MAUI.09A.W09.52.MP.V3.F1
 Changing baudrate to 921600...
 Done.
 Formatting Flash...
 All Done

+++++++++++++++++++End at: 12.11.2013 13:49:20+++++++++++++++++++

*Repair IMEI

Code:

-------------------Created: 12.11.2013 13:58:45-------------------

Chip=MTK
Action=IMEI
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

 Initializing...
 DA_LIB_VER_5.6.1.1
 Tip: The phone must be able to power-on normally
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=1  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6253,    HardwareVer:8A00,    SoftwareVer:8A04
 Read info...ok, Waitting enter meta...
 Connected...can release Power button now, tracking...
 Unable to locate LID, Force write...
 Lid=0x2_0x0056, Val=FFFFFFFFFFFFFF0F0000
 Lid=0x1_0x0056, Val=FFFFFFFFFFFFFF0F0000
 Lid=0x2_0x0095, Val=00000000000000000000
 Lid=0x1_0x0095, Val=00000000000000000000
 All done.

+++++++++++++++++++End at: 12.11.2013 13:59:06+++++++++++++++++++

*All done!